Difference between revisions of "12400 quick start guide"
From cpwiki.net
(→connecting to the appliance for the first time) |
(→connecting to the appliance for the first time) |
||
| Line 8: | Line 8: | ||
* mgmt ip accessible via https and a web browser | * mgmt ip accessible via https and a web browser | ||
* check point instructions are to run the First Time Configuration Wizard by connecting with a browser | * check point instructions are to run the First Time Configuration Wizard by connecting with a browser | ||
| − | * after the wizard run, it is available via CLI through the console or ssh | + | * after the wizard run, it is available via CLI through the console or ssh. If you try to access it before running the Wizard, you get this error message |
| + | |||
| + | This system is for authorized use only. | ||
| + | login: admin | ||
| + | Password: | ||
| + | '''In order to configure your system, please access the Web UI and finish the First Time Wizard.''' | ||
| + | |||
| + | lame... | ||
== front panel == | == front panel == | ||
Latest revision as of 06:34, 12 May 2014
connecting to the appliance for the first time
Gaia and SecurePlatform
- The management interface is marked MGMT with a default IP address of 192.168.1.1
- default username and password: admin /admin
- mgmt ip accessible via https and a web browser
- check point instructions are to run the First Time Configuration Wizard by connecting with a browser
- after the wizard run, it is available via CLI through the console or ssh. If you try to access it before running the Wizard, you get this error message
This system is for authorized use only. login: admin Password: In order to configure your system, please access the Web UI and finish the First Time Wizard.
lame...
front panel
console
Configure the terminal emulation program settings:
- Serial port settings: 9600 BPS, 8 bits, no parity, 1 stop bit.
- Flow control is None.
