manual upgrade notes

From cpwiki.net
Revision as of 06:42, 19 November 2017 by Nighthawk (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Check Point Profressional Services

77.20 to 77.30

installer verions check...

cpvinfo $DADIR/bin/DAService | grep Build                                                              
                                                                                                       

upgrade installer

rpm -Uhv --force CPda-00-00.i386-1278.rpm                                                              
                                                                                                       

check base fw ver

installer import local Check_Point_R77.30_T204_Install_and_Upgrade.tgz                                 
                                                                                                       
installer install Check_Point_R77.30_T204_Install_and_Upgrade.tgz                                      
                                                                                                       

rebooted by installer

77.30 to hotfix to post build script

touch /etc/.wizard_accepted

cpconfig

rpm -ihv --force CPppak-R77-00.i386.rpm

reboot

cpconfig to enable securexl (not needed)

cpconfig to configure corexl instances


configure $FWDIR/boot/modules/fwkern.conf
(13800 example)
fwx_nat_dynamic_port_allocation=1
fwx_old_icmp_nat=1
fw_drop_icmp_errors_over_tcp=1
fwkern_optimize_drops_support=1
fwha_monitor_if_link_state=0

clish> set core-dump enable

reboot

installer import local Check_Point_R77_30_JUMBO_HF_1_Bundle_T216_FULL.tgz
installer install Check_Point_R77_30_JUMBO_HF_1_Bundle_T216_FULL.tgz

reboot (installer)

  1. mkdir HF_INSTALL
  1. cd HF_INSTALL
  2. tar xvfz ../SecurePlatform_HOTFIX_R7730_T216_JHF_879.tgz
  3. ./SecurePlatform_HOTFIX_R7730_T216_JHF_879_990879001_1

reboot