local firewall objects database

From cpwiki.net
Revision as of 14:51, 24 June 2014 by Nighthawk (Talk | contribs)

Jump to: navigation, search
Check Point Profressional Services

Firewall Versions: R65 to R75 (tested)


Object information such as IPs can be gathered locally on the firewall. This is useful for situations where you might cat $FWDIR/conf/masters to check the manager and logger configurations. The problem is all that file presents is object names and you might what the associated IP address... but not want to take the time to look it up on the GUI.

The local firewall object information can be found in

$FWDIR/database/objects.C


commands to run locally on the firewall

# grep -A 200 -r ": (mysmartcenter" * $FWDIR/database/objects.C | grep -i ipaddr
objects.C-                      :ipaddr (192.168.1.100)

where mysmartcenter should be replaced with the object name of interest

a little cleaner command for bash on SPLAT or Gaia

# NAME="object_name_goes_here"; grep -A 200 -r ": ($NAME" * $FWDIR/database/objects.C | grep -i ipaddr

ipso

# set NAME="object_name_goes_here"; grep -A 200 -r ": ($NAME" * $FWDIR/database/objects.C | grep -i ipaddr


get logger and IP

this one works in bash on linux based firewalls or from bash in ipso

 [Expert@myfirewall]# i=`awk '/\[Log\]/{p=1;next}p &&/\[Alert\]/{p=0};p' $FWDIR/conf/masters`; grep -E ": \($i|ipaddr" $FWDIR/database/objects.C | grep -iA1 "$i"|tr -d "()":ipaddr | awk '{print $1}'
 my_clm
 192.168.1.10

--- note: bash is not the default shell in ipso(csh is) ---

swithing to bash in ipso

mychkpfw[admin]# bash
[root@mychkpfw ~]#                   <<< new bash prompt