Juniper junos olive reference

From cpwiki.net
Revision as of 15:32, 17 May 2013 by Nighthawk (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Check Point Profressional Services

initial prompt after olive / junos 8.5R4.3 installation

 root@%

to enter cli

 root@% cli

then you get a new prompt...

 root>

to enter configuration mode:

 root> configure
 Entering configuration mode
 [edit]
 root#     <<< new pound prompt

set root user password

 root# set system login user joost authentication plain-text-password
 New password:
 Retype new password:
 [edit]
 root# set system login user joost class super-user
 [edit]

set interface ip address

 root# set interfaces em0 unit 0 family inet address 192.168.0.200/24
 [edit]

commit your changes and test the new interface that should be working now

 root# commit and-quit
 commit complete
 Exiting configuration mode
 root> ping 192.168.0.1
 PING 192.168.0.1 (192.168.0.1): 56 data bytes
 64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=8.197 ms
 64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=1.927 ms
 64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.648 ms
 64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=0.168 ms

to enable ssh service for incoming management connections

 user@host# set system services ssh 
 [edit]
 root# commit and-quit 
 commit complete