fortinet CLI notes
From cpwiki.net
Contents |
vdom
entering editing a vdom
# config vdom (vdom) # edit myvdom (myvdom) #
interface commands
for admin status, link stat, speeds, counters...
# config global # get hardware nic <interface name>
routes
# config router static # edit <route_index> # set device "<interface_name>" # set dst "<destination_ip>" # set gateway "<router_ip>"
for default gw..
# set dst 0.0.0.0 0.0.0.0
HA status
# config global # get sys ha status
HA failover to highest priority (if it is not currently Master) on current master run...
# config global # diagnose sys ha reset-uptime
get admin hash password
# config global # config sys admin # show
shutdown/reboot
# execute shutdown
or
# execute reboot
firewall
- show firewall policy
packet capture
- diagnose sniffer packet <interface|any> '<tcpdump-filter>' <verbosity> <count>
where if count = 0, then unlimited
example: fotinet1 # diagnose sniffer packet port1 'icmp' 4 2 l interfaces=[port1] filters=[icmp] 2022-08-25 13:16:52.397609 port1 -- 192.168.169.76 -> 192.168.169.31: icmp: echo request 2022-08-25 13:16:52.397673 port1 -- 192.168.169.31 -> 192.168.169.76: icmp: echo reply